Make sure that the paper size setting matches the size of paper loaded into the tray. To have color text or lines areas that could become faint converted to black, select [Text To Black] or [Vector To Black] on the [Color] tab of the printer driver. If the IP address changes frequently, it is recommended that a permanent IP address be assigned to the machine. Select “Auto” or “Color” for the color mode setting. Open the printer properties dialog box and click the [Auto Configuration] button on the [Options] tab.
|Date Added:||14 September 2007|
|File Size:||38.32 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The setting is shrp in the [Page Setup] menu. When the background color of the job management display at the upper right corner of the touch panel is not gray, do not switch off the main power switch or unplug the power plug.
Some functions may have been disabled in the setting mode. By factory default, Notice Pages are not printed. Check the PC settings. Check the Notice Page.
When you need a very clear image, select [Fine]. Use these settings to make simple corrections in a case such as when image editing software is not installed on pfl6 computer.
COLOR PRINTING DOES NOT TAKE PLACE
Correct brightness and contrast with [Color Adjustment Settings] on the [Color] tab of the printer driver. Set the margins correctly in the layout settings of the application. If the IP address is changed, reconfigure the port setting for the printer driver.
The setting is selected in the [Main] tab of the printer driver. Make sure that the routers and other network connection devices are operating correctly. Open the printer properties dialog box and click the [Auto Configuration] button on the [Options] tab.
Check the IP address sahrp. A function that has been prohibited by the administrator is specified.
Select the resolution in the [Advanced] menu of the print window. Tap the [Cancel] key. When 2-sided printing is performed, each page may be printed upside down depending on when the staple position setting. Wait at least 10 seconds and then turn the main power switch to the ” “position. After the pfl6 power indicator changes from flashing green to the lit up state, press the [POWER] button. Raster data such shzrp bitmap images cannot be adjusted.
When there is insufficient memory or hard drive space, or when available memory becomes low because many jobs are spooled in the machine, the printed characters may be garbled.
When the image size and paper size are the same but the orientations are different, the orientation of the image is automatically rotated to match the paper. A Notice Page will be ppcl6 to indicate the cause of the problem if a print job cannot be performed as specified and the cause is not shown in the display. The color mode setting is configured in the [Color] menu of the print window.
Product downloads – Find drivers and software – | Sharp Digital MFPs / Printers
Read the printed page and take appropriate actions. Set the staple position correctly. If shaep machine’s printer driver does not appear in the list of available printer drivers, it may not be installed correctly. Are you using a type of paper tab paper, punch paper, etc.
The setting is selected in the [Layout] menu of the print window. Set the print orientation to match the image. If a device is not powered on or is in an error state, see the manual of the mc-m450n to correct the problem. When [IPsec Settings] is enabled in the setting mode, direct printing of a file in a shared folder may not be possible in your PC environment.
The machine must be connected to the same network as your PC. If the IP address changes frequently, it is recommended that a permanent IP address be assigned to the machine. Does the paper type setting of the selected tray specify a type of paper that cannot be used for 2-sided printing?