Turn the machine power off. Leave a Reply Cancel reply You must be logged in to post a comment. Follow the correct order. When you attach the new drum unit to the development unit, remove a front cover and a front joint at first and use them for reassembling the new drum unit and development unit. Turn the machine power on.
|Date Added:||22 September 2018|
|File Size:||67.23 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The steps below included directions for both replacement procedures. The new drum unit 2c828 a front cover and a front joint. Entering SP Mode 1.
Enter the Service Mode. Typically once you begin experiencing color streaks or color back grounding it can be a symptom that the charge grid and cleaning saviin are beginning to go bad. Make sure that the harness [A] is hooked as shown. The bearing is properly applied with lubricant.
You must be logged in to post a comment. When the development unit is removed from the drum unit, clean the entrance mylar [C] with a vacuum. Otherwise, the hopper cover may be damaged.
When you attach the new drum unit to the development unit, remove a front cover and a front joint at first sqvin use them for reassembling the new drum unit and development unit. Lever lock [A] 3.
Savin C Black Drum Replacement Directions
Turn the machine power on. Hopper cover [A] 4 hooks Release the three hooks first in the correct v2828 Put the head of a screwdriver in the groove gap [B] as shown, and then release the hook. Execute 2c828 drum phase adjustment with SP twice.
Shake a bag of developer and pour it into the development hopper [A]. Keep the developer off at both ends of the development unit enclosed in red lines in the diagram. Open the front door. Do not touch the OPC drum. Majority of print quality problems are related to parts of the drum unit. Do not let metal objects touch the development sleeve.
SAVIN – CNortheastern Office Equipment
The machine initializes the developer and resets the PM counter for the developer. When reassembling the PCU: Open the drum positioning plate [D]. Drum unit [A] and Development Unit [B] 8. Rotate the development roller [A] five or six times in the counterclockwise direction. Savin C Black Drum Replacement — On this page is the instructions for the drum and developer replacement.
Pull out the PCU hold the grip while you pull it out. Remove the front joint [A] The front joint [D] is firmly set.
Savin C2828 Toner Cartridges and Refill Kits
Eavin the correct order. Turn the machine power off. Remove it with a flat screwdriver. Reattach the hopper cover hook x 3. This step removes developer that has stuck to the development roller, which would cause color unevenness.
Front cover [A] Do not touch the bearing [A] after removing the front cover. The hook breaks easily.